This is the basic installation of the Crestron CLX Intelligent Lighting System. This is the process to place the modules in the enclosure and wire them up. Crestron Master Technology Architect (MTA) Master Technology Architect certification shows that you have the required skill set to properly design Crestron solutions. The MTA program grows each year and challenges you to not only know the products, but to also gain a deeper understanding of the technology and apply it to designing Crestron systems. I'm new to Crestron and just getting setup with the training and applications. I completed the intro and it mentioned the Master Installer which would install all applications, but I cannot find it anywhere on the site. There was even a link to the Master Installer on the course registration page, but it took me to a blank page on the website.
- Installer package for driver version 11.5 and Intel PROSet/Wireless Tools version 11.5 supporting Intel(R) Wireless WiFi Link 4965AGN Mini Card and Intel(R) PRO/Wireless 3945ABG Network Connection Mini Card on Windows Vista operating.
- Jul 08, 2009 Crestron Sync - Mac Installation. Crestron Sync is a tool for synchronizing Crestron devices such as the CEN-ISERVER and the CEN-IDOCV with Apple ® iTunes ® (up to version 10.6). To start Download and install: Crestron Sync for Mac OS X 10.4 & 10.5 v1.2.2 (PKG - 12.9M) Crestron Sync for Mac OS X 10.6 v1.2.2 (PKG - 12.9M) Last modified: Oct.
- Crestron software is currently obtained on the Crestron website under 'Support > Software & Firmware.'
- The following link will show only the latest software releases, sorted by 'Last Updated'
- December 1, 2020
- Crestron MasterInstaller 3.03.02.00
- Crestron MasterInstaller for D3 Pro™ 3.03.02.00
- Crestron AVIA DSP Tool 3.07.323.00
- Crestron Toolbox 3.07.323.00
- Crestron Toolbox DALI Commissioning Tool 3.07.323.00
- Crestron Toolbox DVPHD Tool 3.07.323.00
- Crestron Toolbox OnCue BPC8 Tool 3.07.323.00
- Crestron Procise Tool 3.07.323.00
- .AVFramework for AM-200/AM-300 5.02.00.0006
- November 30, 2020
- Device Database 200.30.002.00
- November 20, 2020
- Crestron Home Setup for Mac 1.0.22
- November 18, 2020
- Crestron Smart Graphics™ Controls 2.15.08.23
- Device Database 200.25.003.00
- November 10, 2020
- Cisco Touch 10 Routing and Control 2.0.3
- Crestron Home Setup for Mac 1.0.19
- XPanel Conversion Tool 1.01.614
- November 6, 2020
- Crestron Home Setup for PC 1.0.7
- Crestron Home Setup for Mac 2.16.05
- November 3, 2020
- Crestron Smart Graphics™ Controls 2.15.08.21
- .AVFramework for RMC3 6.07.00.013
- .AVFramework for VC-4 6.07.00.013
- October 27, 2020
- Device Database 200.20.002.00
- VT Pro-e® 6 6.2.01.31
- Crestron Toolbox 3.07.228.02
- Crestron Toolbox DALI Commissioning Tool 3.07.228.02
- Crestron Toolbox OnCue BPC8 Tool 3.07.228.02
- Crestron Database 202.00.001.00
- Crestron Toolbox DVPHD Tool 3.07.228.02
- Crestron Procise Tool 3.07.228.02
- Crestron AVIA DSP Tool 3.07.228.02
- October 6, 2020
- D3 Pro 3.04.001
- October 1, 2020
- .AVFramework for DMPS 6.06.00.015
- .AVFramework for MPC3 6.06.00.015
- .AVFramework for RMC3 6.06.00.015
- .AVFramework for VC-4 6.06.00.015
- Cisco Touch 10 Routing and Control 2.0.0
- Crestron ONE™ Tools for macOS 1.0.6
- Crestron ONE™ Tools for Windows 1.0.6
- September 29, 2020
- Crestron Fusion 11.2.0002.0130
- September 25, 2020
- XiO Cloud 1.17.0.31
- September 22, 2020
- Crestron Procise Tool 3.07.144.00
- Crestron Toolbox OnCue BPC8 Tool 3.07.144
- Crestron AVIA DSP Tool 3.07.144
- Device Database 200.15.001
- Crestron Toolbox DALI Commissioning Tool 3.07.144
- Crestron Toolbox DVPHD Tool 3.07.144
- Crestron Toolbox 3.07.144
- September 10, 2020
- SIMPL Windows 4.14.21
- Device Database 200.10.001
- Crestron Database 201.05.001.00
- AirMedia_Windows_Guest_Application 3.8.1.17
- AirMedia_Windows_Deployable_Application 3.8.1.17
- August 26, 2020
- Device Database 200.05.001
- Crestron Database 201.00.004.00
- August 11, 2020
- Device Database 200.01.001
- August 4, 2020
- .AVFramework for AM-200/AM-300 5.00.00.021
- July 29, 2020
- Crestron Go for iOS 1.00.04
- July 28, 2020
- Crestron Database 200.00.004.00
- Device Database 200.00.015.00
- July 27, 2020
- Cisco Touch 10 Routing and Control 1.0.3
- July 21, 2020
- XiO Cloud Version: 1.16.3.18
- Device Database Version: 115.08.002.00
- Crestron Smart Graphics™ Controls Version: 2.15.06.01
- July 14, 2020
- Crestron Database 90.00.004.00
- Device Database 115.07.001.00
- July 8, 2020
- .AVFramework for VC-4 6.05.00.012
- .AVFramework for RMC3 6.05.00.012
- .AVFramework for MPC3 6.05.00.012
- .AVFramework for DMPS 6.05.00.012
- July 7, 2020
- Device Database 115.06.003.00
- Jun 30, 2020
- Device Database 115.05.002.00
- Crestron AVIA DSP Tool 3.07.070.00
- Crestron Procise Tool 3.07.070.00
- Crestron OnCue BPC8 Tool 3.07.070.00
- Crestron Toolbox DVPHD Tool 3.07.070.00
- Crestron Toolbox DALI Commissioning Tool 3.07.070.00
- Crestron Toolbox 3.07.070.00
- Jun 23, 2020
- AirMedia_OSx_Guest_Application 3.2.1
- AirMedia macOS Deployable Application 3.2.1
- AirMedia_Windows_Guest_Application 3.7.1.46
- AirMedia_Windows_Deployable_Application 3.7.1.46
- Jun 16, 2020
- .AVFramework for DMPS 6.04.00.09
- Crestron Smart Graphics ™ Controls 2.15.05.03
- Jun 02, 2020
- Crestron HomeTime Sample Program 1.0.0
- Information Gathering Tool for Crestron® Devices 3.5.4.851
- May 18, 2020
- TSW-XX60_Direct_Connect_Style_Sheets 1.2.6.1
- May 14, 2020
- Simpl Windows 4.14.20.00
- May 5, 2020
- Crestron Smart Graphic Controls 2.15.04.01
- .AVFramework for AM-200/AM-300 4.05.00.12
- CH5 Contract Editor (Windows) 1.0.17.00
- Crestron Scheduling UI SDK 1.2.6.1
- CH5 Contract Editor (macOS) 1.0.17.00
- April 28, 2020
- .AVFramework for MPC3 6.04.00.009
- .AVFramework for RMC3 6.04.00.009
- .AVFramework for VC-4 6.04.00.009
- Crestron Database 89.05.002.00
- April 21, 2020
- Crestron Database 89.00.001.00
- April 15, 2020
- Crestron Procise Tool 3.05.223.00
- Crestron OnCue BPC8 Tool 3.05.223.00
- Crestron Toolbox DVPHD Tool 3.05.223.00
- Crestron Toolbox DALI Commissioning Tool 3.05.223.00
- Crestron Toolbox 3.05.223.00
- Crestron AVIA DSP Tool 3.05.223.00
- April 7, 2020
- Crestron Database 88.06.004.00
- D3 Pro 3.03.033.00
- April 1, 2020
- SIMPL Windows 4.14.10.00
- Mar 31, 2020
- Crestron Database 88.05.002.00
- Device Database 115.00.002
- Mar 23, 2020
- Crestron Engraver 114.00.001.00
- Mar 17, 2020
- Crestron Database 88.00.002.00
- Mar 03, 2020
- Device Database 114.00.001.00
- Feb 28, 2020
- Information Gathering Tool for Crestron® Devices 3.5.2.821
- Feb 18, 2020
- Device Database 113.05.001.00
- Feb 04, 2020
- Crestron Toolbox 3.05.116
- Crestron Remote 1.00.00.785
- Crestron Toolbox DVPHD Tool 3.05.116.00
- Crestron Toolbox DALI Commissioning Tool 3.05.116.00
- Crestron OnCue BPC8 Tool 3.05.116.00
- Crestron AVIA DSP Tool 3.05.116.00
- Crestron Procise Tool 3.05.116.00
- .AVFramework for DMPS 6.03.00.013
- Jan 29, 2020
- XiO Cloud 15
- Jan 28, 2020
- .AVFramework for VC-4 6.03.00.013
- .AVFramework for RMC3 6.03.00.013
- .AVFramework for MPC3 6.03.00.013
- Crestron Fusion 11.2.0001.0035
- Jan 21, 2020
- Crestron Scheduling UI SDK 1.1.23.0
- Device Database 112.00.001.00
- Crestron Database 86.00.002.00
- Use MasterInstaller to simultaneously download the latest versions of most Crestron software
- https://www.crestron.com/en-us/support/search-results?q=MasterInstaller
- https://www.crestron.com/en-us/support/search-results?q=MasterInstaller
- Use links below to find direct downloads of current software versions:
- Crestron Database*
- Device Database*
- SystemBuilder (Legacy Software for 2-Series & Non-Smart Graphics - Use Crestron Studio for 3-Series & Smart Graphics)
- Toolbox [*NOTE - Requires Crestron Database & Device Database]
- VT Pro-e
- Older software versions can be found on Crestron's FTP server:
- Each program's folder will contain an /archive/ subfolder with older versions.
- Reference the DATE alongside each version of software in the archive subfolder.
- Login to the FTP server with the same credentials used for accessing https://www.crestron.com.
- Discontinued (legacy) software can be found in OLH 5565
Newtonsoft.Json version 3.5.0.0
Crestron Master Installer Tool
#236606 Does anyone know how to get Newtonsoft.Json version 3.5.0.0 back on my system? I'm getting this error message when trying to compile Do I have to reinstall VS2008 from scratch? Error (Line 26) - polycomgroupseriesdriver3.0.17.dll cannot be used due to it's dependancy on Newtonsoft.Json.Compact, version 3.5.0.0. The system is using Newtonsoft.Json.Compact version 4.0.8.0 Thanks Shawn |
#236608 |
#236609 Downgrade to a DB version less than 200 If you have the misfortune of having other modules that are dependent on DB 200 or greater you’re going to either need to reach out to the author of the module and get them to recompile it with DB version 200 (upgrading the dependency) or isolate some portion of the logic in different program slots (one with post DB200 and one pre DB200) -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D From: crestron@groups.io [mailto:crestron@groups.io]On Behalf Of Shawn F Sent: Monday, August 17, 2020 3:17 PM To: crestron@groups.io Subject: [crestron] Newtonsoft.Json version 3.5.0.0 Does anyone know how to get Newtonsoft.Json version 3.5.0.0 back on my system? I'm getting this error message when trying to compile |
#236612 It looks like the older databases are not on the Crestron support site. Is there another location to get the older database? |
#236613 ftp.crestron.com with your Crestron logins -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D From: crestron@groups.io [mailto:crestron@groups.io]On Behalf Of Shawn F Sent: Monday, August 17, 2020 4:06 PM To: crestron@groups.io Subject: Re: [crestron] Newtonsoft.Json version 3.5.0.0 It looks like the older databases are not on the Crestron support site. Is there another location to get the older database? |
#236614 Also if you haven’t cleaned them out you may have them locally in C:Program Files (x86)CrestronDownloads or similar I intentionally keep 3-4 versions of everything on my laptop just in case – given the number of sites I wind up on where Internet access isn’t available/permitted. Lincoln -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D From: crestron@groups.io [mailto:crestron@groups.io]On Behalf Of Shawn F Sent: Monday, August 17, 2020 4:06 PM To: crestron@groups.io Subject: Re: [crestron] Newtonsoft.Json version 3.5.0.0 It looks like the older databases are not on the Crestron support site. Is there another location to get the older database? |
#236615 Found them... the past 5 years worth lol. Thank you very much Lincoln. I owe you one. :P |
#236616 For reference the Polycom Group Series driver is being updated to function with Newtonsoft.Json.Compact version 4.0.8.0. I don’t know exactly when it is going to be released but it is coming. toggle quoted messageShow quoted textCheers,
|
#236622 |
#236623 Just going to use this as a running tally of Crestron modules that are now broken: Jandy iAqualink Sony IP Receivers -- Ryan Baldwin CEO | XS Design Studios rbaldwin@... 760.712.2240 |
#236684 Can you please explain how to downgrade the database to an older version? Never have done that before. Thanks, |
#236689 All you need to do is install a database version that’s less than 200. If you’re using MasterInstaller and haven’t cleaned up/deleted old versions after installation these can be found in C:Program Files (x86)CrestronDownloads Otherwise you can download them from the Crestron FTP site. Lincoln -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D From: crestron@groups.io [mailto:crestron@groups.io]On Behalf Of ekontos via groups.io Sent: Wednesday, August 19, 2020 9:15 PM To: crestron@groups.io Subject: Re: [crestron] Newtonsoft.Json version 3.5.0.0 Can you please explain how to downgrade the database to an older version? Never have done that before. Thanks, |
#236696 I'm having the same issue with Cisco Room Devices 4.0 which says it works with Device DB 200.00.004.00 and later, but I guess it doesn't. |
#236717 The latest version of SIMPL and Toolbox require Crestron DB and Device DB versions 200+ (at least Master Installer says they are dependent). So you may need to back down SIMPL to 4.11.06.01 and Toolbox to 3.05.223.0. I'm not sure if there are other dependencies. D3 and Studio are probably the same way. Someone please correct me if I'm wrong. For the list of Application Market modules that are affected by this, search for 'Application Market modules affected list' on labs. QSC Q-Sys isn't on the list, but should be. -- Josh Winn The LiquidPixel Group |
#236718 I wonder what other modules should be on the list but aren't. toggle quoted messageShow quoted textOn Fri, Aug 21, 2020 at 1:41 PM josh@LiquidPixel <jwinn@...> wrote: The latest version of SIMPL and Toolbox require Crestron DB and Device DB versions 200+ (at least Master Installer says they are dependent). So you may need to back down SIMPL to 4.11.06.01 and Toolbox to 3.05.223.0. I'm not sure if there are other dependencies. D3 and Studio are probably the same way. Someone please correct me if I'm wrong. |
#236748 Edited its a pain in the butt to get this to work. What i have had to do is: Download the cisco RD 4.0 demo from the application market. Import into simpl - v.4.14.20 with both databases 200+. so update everything. import to project folders. not user folders compile. should compile clean take every file in that demo folder and copy into your project folder you are working on. now it should compile clean. its best to keep the demo files in a separate folder in case you get another project with a cisco RD module. crestron is still working on these issues. but this has been a work around for the time being. |
#236799 I was just searching for this subject and came across this thread. I hope after 10 days you found the solution. You have to revert your crestron and device databases back to <200. I was hoping to find anyone who has found a better solution. Rolling back or running a VM is not convenient or piratical. There are certain modules that this bombs on i.e. nest v1.4 module, written by crestron and some others. I realize things have to advance, but at the same time we still have to maintain older stuff where updates are not available. |
#236802 Crestron had indicated that any of their/application market modules that used Newtonsoft would be updated before DB 200 was released – obviously that wasn’t the case. The good news is aside from having to close SIMPL windows, etc. it’s relatively painless to roll databases backwards and forwards but I do think it’s somewhat insane that this is such a breaking change. The looming catastrophe will be those cases where new modules require DB 200 need to be used in systems with older/orphaned modules that only work pre-DB 200. On processors with multiple program slots there’s an inelegant/clumsy workaround of putting things in their own program slots but for single-slot processors (e.g. MPC3, RMC3 or MC4 without slots 2-10 licensed) that’s not an option – and for the processors where it is an option it’s not a good one. -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D From: crestron@groups.io [mailto:crestron@groups.io]On Behalf Of Wyatt J Sent: Thursday, August 27, 2020 11:23 AM To: crestron@groups.io Subject: Re: [crestron] Newtonsoft.Json version 3.5.0.0 I was just searching for this subject and came across this thread. I hope after 10 days you found the solution. You have to revert your crestron and device databases back to <200. I was hoping to find anyone who has found a better solution. Rolling back or running a VM is not convenient or piratical. There are certain modules that this bombs on i.e. nest v1.4 module, written by crestron and some others. I realize things have to advance, but at the same time we still have to maintain older stuff where updates are not available. |
#236814 Nuheat Floor Heating modules are using the new database. -- Ryan Baldwin CEO | XS Design Studios rbaldwin@... 760.712.2240 |
#236976 This is my first time needing to downgrade Device Database. Where can I find instructions to do that? |